Transcription

000He a lt h0Fire0Re a c t iv it y0P e rs o n a lP ro t e c t io nAMaterial Safety Data SheetWater MSDSSection 1: Chemical Product and Company IdentificationProduct Name: WaterContact Information:Sciencelab.com, Inc.14025 Smith Rd.Houston, Texas 77396Catalog Codes: SLW1063CAS#: 7732-18-5US Sales: 1-800-901-7247International Sales: 1-281-441-4400RTECS: ZC0110000TSCA: TSCA 8(b) inventory: WaterOrder Online: ScienceLab.comCI#: Not available.Synonym: Dihydrogen oxideCHEMTREC (24HR Emergency Telephone), call:1-800-424-9300Chemical Name: WaterInternational CHEMTREC, call: 1-703-527-3887Chemical Formula: H2OFor non-emergency assistance, call: 1-281-441-4400Section 2: Composition and Information on IngredientsComposition:NameCAS #% by WeightWater7732-18-5100Toxicological Data on Ingredients: Not applicable.Section 3: Hazards IdentificationPotential Acute Health Effects:Non-corrosive for skin. Non-irritant for skin. Non-sensitizer for skin. Non-permeator by skin. Non-irritating to the eyes. Nonhazardous in case of ingestion. Non-hazardous in case of inhalation. Non-irritant for lungs. Non-sensitizer for lungs. Noncorrosive to the eyes. Non-corrosive for lungs.Potential Chronic Health Effects:Non-corrosive for skin. Non-irritant for skin. Non-sensitizer for skin. Non-permeator by skin. Non-irritating to the eyes.Non-hazardous in case of ingestion. Non-hazardous in case of inhalation. Non-irritant for lungs. Non-sensitizer for lungs.CARCINOGENIC EFFECTS: Not available. MUTAGENIC EFFECTS: Not available. TERATOGENIC EFFECTS: Not available.DEVELOPMENTAL TOXICITY: Not available.Section 4: First Aid MeasuresEye Contact: Not applicable.p. 1

Skin Contact: Not applicable.Serious Skin Contact: Not available.Inhalation: Not applicable.Serious Inhalation: Not available.Ingestion: Not ApplicableSerious Ingestion: Not available.Section 5: Fire and Explosion DataFlammability of the Product: Non-flammable.Auto-Ignition Temperature: Not applicable.Flash Points: Not applicable.Flammable Limits: Not applicable.Products of Combustion: Not available.Fire Hazards in Presence of Various Substances: Not applicable.Explosion Hazards in Presence of Various Substances: Not ApplicableFire Fighting Media and Instructions: Not applicable.Special Remarks on Fire Hazards: Not available.Special Remarks on Explosion Hazards: Not available.Section 6: Accidental Release MeasuresSmall Spill: Mop up, or absorb with an inert dry material and place in an appropriate waste disposal container.Large Spill: Absorb with an inert material and put the spilled material in an appropriate waste disposal.Section 7: Handling and StoragePrecautions: No specific safety phrase has been found applicable for this product.Storage: Not applicable.Section 8: Exposure Controls/Personal ProtectionEngineering Controls: Not ApplicablePersonal Protection: Safety glasses. Lab coat.Personal Protection in Case of a Large Spill: Not ApplicableExposure Limits: Not available.Section 9: Physical and Chemical PropertiesPhysical state and appearance: Liquid.p. 2

Odor: Odorless.Taste: Not available.Molecular Weight: 18.02 g/moleColor: Colorless.pH (1% soln/water): 7 [Neutral.]Boiling Point: 100 C (212 F)Melting Point: Not available.Critical Temperature: Not available.Specific Gravity: 1 (Water 1)Vapor Pressure: 2.3 kPa (@ 20 C)Vapor Density: 0.62 (Air 1)Volatility: Not available.Odor Threshold: Not available.Water/Oil Dist. Coeff.: Not available.Ionicity (in Water): Not available.Dispersion Properties: Not applicableSolubility: Not ApplicableSection 10: Stability and Reactivity DataStability: The product is stable.Instability Temperature: Not available.Conditions of Instability: Not available.Incompatibility with various substances: Not available.Corrosivity: Not available.Special Remarks on Reactivity: Not available.Special Remarks on Corrosivity: Not available.Polymerization: Will not occur.Section 11: Toxicological InformationRoutes of Entry: Absorbed through skin. Eye contact.Toxicity to Animals:LD50: [Rat] - Route: oral; Dose: 90 ml/kg LC50: Not available.Chronic Effects on Humans: Not available.Other Toxic Effects on Humans:Non-corrosive for skin. Non-irritant for skin. Non-sensitizer for skin. Non-permeator by skin. Non-hazardous in case ofingestion. Non-hazardous in case of inhalation. Non-irritant for lungs. Non-sensitizer for lungs. Non-corrosive to the eyes. Noncorrosive for lungs.Special Remarks on Toxicity to Animals: Not available.p. 3

Special Remarks on Chronic Effects on Humans: Not available.Special Remarks on other Toxic Effects on Humans: Not available.Section 12: Ecological InformationEcotoxicity: Not available.BOD5 and COD: Not available.Products of Biodegradation:Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.Toxicity of the Products of Biodegradation: The product itself and its products of degradation are not toxic.Special Remarks on the Products of Biodegradation: Not available.Section 13: Disposal ConsiderationsWaste Disposal:Waste must be disposed of in accordance with federal, state and local environmental control regulations.Section 14: Transport InformationDOT Classification: Not a DOT controlled material (United States).Identification: Not applicable.Special Provisions for Transport: Not applicable.Section 15: Other Regulatory InformationFederal and State Regulations: TSCA 8(b) inventory: WaterOther Regulations: EINECS: This product is on the European Inventory of Existing Commercial Chemical Substances.Other Classifications:WHMIS (Canada): Not controlled under WHMIS (Canada).DSCL (EEC):This product is not classified according to the EU regulations. Not applicable.HMIS (U.S.A.):Health Hazard: 0Fire Hazard: 0Reactivity: 0Personal Protection: aNational Fire Protection Association (U.S.A.):Health: 0Flammability: 0Reactivity: 0Specific hazard:p. 4

Protective Equipment:Not applicable. Lab coat. Not applicable. Safety glasses.Section 16: Other InformationReferences: Not available.Other Special Considerations: Not available.Created: 10/10/2005 08:33 PMLast Updated: 05/21/2013 12:00 PMThe information above is believed to be accurate and represents the best information currently available to us. However, wemake no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assumeno liability resulting from its use. Users should make their own investigations to determine the suitability of the information fortheir particular purposes. In no event shall ScienceLab.com be liable for any claims, losses, or damages of any third party or forlost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if ScienceLab.comhas been advised of the possibility of such damages.p. 5

Doc. No.: MSDS-034DCP No.: 1955Effective Date: 3/19/084801 North Ravenswood AvenueChicago, IL 60640-4496Phone: (773) 907-5181Fax: (773) 907-5180E-mail ([email protected])Material Safety Data SheetEmergency/Information: (800) 420-8021Section 1 - Product InformationPRODUCT NAME: No Clean Solder Wire - LF965-30 (Sn96.5/Ag3.0/Cu0.5)PRODUCT DESCRIPTION: No Clean Solder WirePRODUCT CODE: SPC22157Section 2 – Composition/Information on IngredientsChemical NameWt%CAS92.3 - 96.27440-31-52.7 - 3.27440-22-40.3 - 0.77440-50-8*Exact weight percentages can be determined from the product labelTin*Silver*Copper *EINECS231-141-8231-131-3231-159-6Section 3 – Hazards IdentificationPOTENTIAL HEALTH EFFECTSEYES: Fumes from this and other soldering products may cause eye irritation.SKIN: Fumes from this and other soldering products may cause skin irritation.INGESTION: Ingestion of this or other soldering products may cause headache, nausea, and muscular pain.INHALATION: Inhalation of the fumes from this or other soldering products may cause headache, nauseaand muscular pain.SIGNS AND SYMPTOMS OF OVEREXPOSURESKIN: Discomfort or rash.INHALATION: Irritation of the pulmonary system.CHRONIC: Prolonged or repeated exposure due to ingestion may cause anemia, insomnia, weakness,constipation and abdominal pain.Prolonged or repeated exposure due to skin exposure and inhalation may cause skin rash anddamage to the mucous membranes.CARCINOGENICITY: Not listed as a carcinogen by NTP, OSHA, or ACGIH.MEDICAL CONDITIONS AGGRAVATED: Pre-existing conditions of the lungs, kidneys, nervous system andpossibly reproductive systems; diseases of the blood forming organsROUTES OF ENTRY: Inhalation, ingestion, eye or skin contactMSDS-0341 of 6NA Not Applicable NE Not Established UN Unknown

Doc. No.: MSDS-034DCP No.: 1955Effective Date: 3/19/084801 North Ravenswood AvenueChicago, IL 60640-4496Phone: (773) 907-5181Fax: (773) 907-5180E-mail ([email protected])Material Safety Data SheetEmergency/Information: (800) 420-8021Section 4 – First Aid MeasuresEYES:MOLTEN PRODUCT: Cool burns with plenty of low-pressure water. Get immediate medicalattention.SOLID PRODUCT: Remove any contact lenses. Immediately flush eyes with large quantities of waterfor at least 15 minutes. Get medical attention if irritation develops.SKIN:MOLTEN PRODUCT: Immediately cool skin burns with water and cold packs for at least 15 minutes.Do not put ice directly on the skin.Do not attempt to remove solidified product from the skin, as damage may result. Get immediatemedical attention.SOLID PRODUCT:Immediately wash skin with soap and copious amounts of water. Use lotion to prevent dryness. Getmedical attention if irritation develops.INGESTION: If person is conscious, immediately give 2 glasses of water. Do not induce vomiting. Getimmediate medical attention.INHALATION: If symptoms of overexposure are experienced, evacuate to fresh air. If symptoms persist,seek medical attention.COMMENTS: If victims of chemical over-exposure are taken for medical attention, give a copy of the label orthis MSDS to the physician/health care professional.Section 5 – Fire Fighting MeasuresFLASHPOINT AND METHOD: Not ApplicableFLAMMABLE LIMITS: Not EstablishedAUTOIGNITION TEMPERATURE: Not ApplicableEXTINGUISHING MEDIA: Alcohol foam, carbon dioxide, or dry chemical.EXPLOSION HAZARDS: Closed containers may explode when exposed to fire conditions.FIRE FIGHTING EQUIPMENT: Self contained breathing apparatus with full face piece operated in positivepressure demand mode, appropriate turn-out gear and chemical resistant personal protectiveequipment is recommended.MSDS-0342 of 6NA Not Applicable NE Not Established UN Unknown

Doc. No.: MSDS-034DCP No.: 1955Effective Date: 3/19/084801 North Ravenswood AvenueChicago, IL 60640-4496Phone: (773) 907-5181Fax: (773) 907-5180E-mail ([email protected])Material Safety Data SheetEmergency/Information: (800) 420-8021Section 6 – Accidental Release MeasuresGENERAL PROCEDURES: If the material is in its solid state, pick up and reuse. When molten, allow tosolidify, and then reuse if it is not contaminated. If contaminated, refer to Section 13 for proper disposalprocedures.RELEASE NOTES: Avoid repeated or prolonged breathing or skin contact. Wash hands immediately, andremove material from under the fingernails.Section 7 – Handling and StorageGENERAL PROCEDURES: Do not store or use near sparks or open flames. Keep containers tightly closedand upright when not in use in order to prevent leakage.Section 8 – Exposure Controls / Personal ProtectionExposure GuidelinesOSHA Hazardous Components (29 CFR 1910.1200)Tin*Silver *Copper*TWASTELTWASTELTWASTELOSHA PELppm mg/m3NL[1 ] 2.00NL NLNL 0.10NLNLNL 0.20NLNLACGIH TLVppm mg/m3NL2.00NLNLNL0.10NLNLNL0.20NLNLSupplier OELppm mg/m3NLNLNLNLNLNLNLNLNLNLNLNL*Exact weight percentages can be determined from the product labelOSHA Table Comments1. NL Not ListedENGINEERING CONTROLS: General (mechanical) room ventilation is expected to be satisfactory wherethis product is stored and handled and in closed equipment. Special local ventilation is needed at pointswhere vapors can be expected to escape into the workplace air.PERSONAL PROTECTIVE EQUIPMENTEYES AND FACE: Face shield, safety glasses with side shield or chemical splash goggles. Whenworking with molten material, face shield is recommended.SKIN: Rubber, chemical resistant gloves. When material is heated, wear gloves to protect againstthermal burns.RESPIRATORY: Not normally needed in well ventilated areas. If the ventilation is insufficient toremove smoke from soldering processes, use NIOSH/MSHA approved cartridge type respirator.MSDS-0343 of 6NA Not Applicable NE Not Established UN Unknown

Doc. No.: MSDS-034DCP No.: 1955Effective Date: 3/19/084801 North Ravenswood AvenueChicago, IL 60640-4496Phone: (773) 907-5181Fax: (773) 907-5180E-mail ([email protected])Material Safety Data SheetEmergency/Information: (800) 420-8021PROTECTIVE CLOTHING: Protective clothing and safety shoes as necessary to minimize contact.WORK HYGIENIC PRACTICES: Good personal hygiene practices should be used. Wash after any contact,before eating, and at the end of the work period.OTHER USE PRECAUTIONS: Eye wash station and quick drench safety shower in immediate work area.Section 9 – Physical and Chemical PropertiesODOR: Odorless.APPEARANCE: Metal in wire form.COLOR: Silver grayVAPOR PRESSURE: 1 mmHg at 866 C (1591 F)VAPOR DENSITY: Not DeterminedBOILING POINT: 1380 C (2516 F)@ 760 mmHgMELTING POINT: 183 C (361 F)(alloy)SOLUBILITY IN WATER: Partially SolubleSection 10 – Stability and ReactivitySTABILITY: Stable under ordinary use and storage conditions.POLYMERIZATION: Will not occur under normal use and storage conditions.HAZARDOUS DECOMPOSITION PRODUCTS: May emit toxic fumes of carbon monoxide and carbondioxide.INCOMPATIBLE MATERIALS: Strong acids and strong oxidizers should be avoided.Section 11 – Toxicological InformationGENERAL COMMENTS: No toxicological information available at this time.Section 12 – Ecological InformationGENERAL COMMENTS: No information on ecological toxicity or b