Transcription

Model: IP8100 series telephone

Table Of ContentsGETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1GPL License Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Installation Directions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4THE SETUP WIZARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Internet Connection Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Dynamic IP Address Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14PPPoE Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Set Static IP Address Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Setup Completed Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17MENU STRUCTURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19BASIC SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Setup Wizard Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20ISP Connection Settings Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . 20ADVANCED SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Virtual Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28DMZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29ADMIN SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30DHCP Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Other Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Restore Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35STATUS SCREENS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Broadband Telephone Information . . . . . . . . . . . . . . . . . . . . . 36Activity Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Traffic Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38DHCP Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39HELP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . 45TECHNICAL SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . 49

Before you begin1. Pre-register with Vonage Service by logging on to www.vonage.com.2. Check and make sure you meet the system requirement below. You must have a personal computer with the following applications andhardware: Microsoft Internet ExplorerTM 5.5 or higher for Windows; orMicrosoft Internet ExplorerTM 5.x or Apple SafariTM 1.0 for Mac OS9 or higher CD-ROM drive 10/100 Base-T Ethernet Port DSL or two-way Cable broadband Internet Service Two-way broadband modem supporting a minimum of 90kbps uplink Ethernet port on modem; USB-only modems are not supported3. During installation you may be required to enter a username and passwordif you are a DSL user who is required to enter a user name and password(PPPoE) to access the Internet, and you may be required to enter aspecific IP addresses if you have a static IP address. Before you begin, besure to contact your Internet Service Provider to obtain this information.4. Check for package contents (see page 3 for a complete list) then followthe step-by-step installation directions (see page 4) to install and configurethe IP8100 series telephone.Note: you may download the latest copy of the IP8100 series telephoneUser Manual by accessing the Customer Support tab on www.vtechphones.com Getting StartedGetting Started

Getting StartedGPL License InformationPortions of the software associated with this product are open source, and fallwithin the scope of the GNU General Public License (GPL). Accordingly, thoseportions of code are available to the public, consistent with the requirements ofthe GPL, in either source code format or object code format, depending uponthe nature of the code at issue. If you would like to exercise your right to receivethe available code, please send a cashier’s check, payable to VTech Communications, Inc., in the amount of 10.00 (U.S. ) to:VTech Communications, Inc.,9590 SW Gemini Drive, Suite 120Beaverton OR 97008ATTN: Information Technology Group / IP8100 GPL code request,along with a written request for the available code. If your request does not fullycomply with the foregoing requirements, VTech reserves the right to reject yourrequest. Further, by requesting and receiving the available code, you releaseVTech, its affiliates, and its and their officers, directors, employees, andrepresentatives(“VTech Parties”) from any liability or responsibility relating tosuch code, and you acknowledge that the VTech Parties make no representations with respect to the origin, accuracy, usability, or usefulness of such code,and the VTech Parties have no responsibility to you whatsoever concerningthe code, including without limitation any responsibility to provide explanation,support, upgrade, or any communication whatsoever. Your review or use of theavailable code is at your sole risk and responsibility.

The IP8100 series Broadband telephone is an advanced Broadband VoIPcordless telephone set, capable of supporting up to four handsets. Your package contains:1.2.3.4.5.Base UnitHandset(s)Handset Charger(s)Ethernet CablesBase Power Adapter6. Charger Wall Mounting Bracket(s)7. Belt Clip(s)8. User Documentation CD9. Quick Start Guide10. Battery(ies)Base UnitBatteryHandsetBlue Ethernet CableBase AC AdapterHandset ChargerYellow Ethernet CableBelt ClipCharger WallUser Documentation CD Quick Start Guide Mounting BracketYour broadband telephone accommodates up to 4 handsets. You can add newhandset, model IP811, by visiting www.vtechphones.com or call VTech Communications Inc. at 800-595-9511. Getting StartedPackage Contents

Getting StartedInstallation DirectionsInstallation Without A RouterINTERNETDSL or Cable ModemPCHandset 1 & 2PC/LAN PortWAN PortBase UnitNOTE: The IP8100 series telephone isexpandable up to a total of 4 handsets.Uses model IP811 (sold separately)Warning: Do not route the Ethernet cable to outdoors, and ensure that you areusing a safety approved DSL or Cable modem with proper electrical isolation.STEP 1Unplug the power cord from your Cable or DSL modem (the device your ISPprovided which provides high-speed Internet). Make sure that you turn yourcomputer off and that you do NOT plug in your IP8100 series broadband telephone until instructed to do so.Helpful Hint: The modem should be powered off for at least 10 minutes. If it isturned off for a shorter period of time, it may remember old information that willprevent it from working properly.STEP 2Disconnect all cables between your Cable or DSL modem and your computer.

STEP 3Connect one end of the yellow Ethernet cable to the yellow port, labeled “PC/LAN,” located on the back of the base unit and connect the other end of the yellow cable to the Ethernet port of your computer.STEP 4Connect one end of the blue Ethernet cable to the blue port, labeled “WAN,”located on the back of the base unit and connect the other end of the blue cableto the Ethernet port on your cable or DSL modem.STEP 5Reconnect power cord to the modem then turn the modem on. Please wait untilall lights on the modem stop blinking.Helpful Hint: This should take a few minutes, but may take as long as 10 minutes.STEP 6Plug the power cord into the power port located on the bottom or your IP8100series telephone and the other end into the electrical outlet. This turns the IP8100 series broadband telephone on.Helpful Hint: Do NOT interrupt this registration process by unplugging the power or by using the handsets until the READY indicator light on the front of basehas gone from flashing yellow to a steady green.Helpful Hint: Use only the power cord provided in this package; using an olderpower cord can damage the broadband telephone.STEP 7Turn your computer on, and check your computer to see if your Internet is working, try to visit any website. If your Internet is working, please proceed to STEP10. If not, please proceed to STEP 8.STEP 8:Cable UsersIf you receive Internet access through a Cable modem, you may need to registerthe IP8100 series phone with your ISP. Please contact them to update yourinformation; you will likely need your WAN MAC address, which is located onthe bottom of the base. Once your ISP has updated your account, proceed tostep 9.-- OR -DSL UsersIf you have DSL and are required to enter a user name and password (PPPoE)when accessing the Internet, you may be required to authenticate the IP8100series telephone. Getting StartedInstallation Directions

Getting StartedInstallation DirectionsA.B.C.Open a web browser such as Microsoft Internet Explorer using thecomputer connected through your IP8100 Ethernet port. In theaddress of location field, type http://192.168.15.1 and press ENTER.This displays the login screen. Enter the default password ‘VTech’and click on login.On the Setup Wizard screen, click Run Wizard to start the set-up.Follow Wizard screens to complete the setup.STEP 9:Check for dial tone by pressing the ON button on your handset. If you do not heara dial tone, please refer to the Troubleshooting section of the user manual.Congratulations! Even if you are transferring your number, you are ready tostart taking advantage of the great savings and superior quality of Vonage rightnow! Please call 800-342-1791 to setup your voicemail service and to learnabout other free Vonage features included with every Vonage calling plan.

Getting StartedInstallation DirectionsInstallation With A RouterBase UnitINTERNETDSL or Cable ModemPCWAN PortLaptopHandset 1 & 2ExistingNetwork Router NOTE: The IP8100 series telephone is expandable up toa total of 4 handsets. Uses model IP811 (sold separately)Warning: Do not route the Ethernet cable to outdoors, and ensure that you areusing a safety approved DSL or Cable modem with proper electrical isolation.STEP 1:Using the blue Ethernet cable provided, connect one end into the blue port,labeled “WAN,” located on the back of the IP8100 series broadband telephonebase unit and connect the other end into an available LAN port on your router. Ifyou have a wireless router, place the base unit at least three feet (36 inches) awayfrom your router to avoid interference.Helpful Hint: If all the Ethernet ports on your existing router are full, disconnectone of the attached devices from the existing router. Plug the blue Ethernet cableinto the now free port on your router. Connect the device you just unpluggedfrom your router to the yellow “PC/LAN” port located on the back of IP8100 seriesbroadband telephone base unit.

Getting StartedInstallation DirectionsSTEP 2:Plug the power cord into the power port located on the bottom of your base unitand the other end into the electrical outlet. This turns the broadband telephoneon.Helpful Hint: Do NOT interrupt this registration process by unplugging the power or by using the handsets until the READY indicator light on the front of basehas gone from flashing yellow to a steady green.Helpful Hint: Use only the power cord provided in this package; using any otherpower cord could damage the broadband phone.STEP 3:Check for dial tone by pressing the ON button on your handset. If you do nothear a dial tone, please refer to the Troubleshooting section of the user manual.Congratulations! Even if you are transferring your number, you are ready to starttaking advantage of the great savings and superior quality of Vonage right now!Please call 800-342-1791 to setup your voicemail service and to learn aboutother free Vonage features included with every Vonage calling plan.

Getting StartedInstallation DirectionsInstallatiozn With A Modem RouterINTERNETBase UnitPCWAN PortLaptopDSL or Cable ModemHandset 1 & 2 NOTE: The IP8100 series telephone is expandable up toa total of 4 handsets. Uses model IP811 (sold separately)Warning: Do not route the Ethernet cable to outdoors, and ensure that you areusing a safety approved DSL or Cable modem with proper electrical isolation.STEP 1:Using the blue Ethernet cable provided, connect one end into the b