Transcription

18850 Adams CtMorgan Hill, CA 95037www.AircraftCovers.comPhone: 408/738-3959Toll Free (U.S.): 800/777-6405Fax: 408/738-2729Email: [email protected] of the finest custom-made aircraft coversTech Sheet: Rockwell OV-10 Bronco(rockwell-OV10.pdf)ENGINE PLUGS PREVENT BIRD NEST FOD. Piper Saratoga Engine Cowling Bird's NestENGINE PLUGS PREVENT BIRD NEST FOD. Piper Saratoga Engine Cowling Bird's NestSection 1: Canopy/Cockpit/Fuselage CoversCanopy Covers help reduce damage to your airplane's upholstery and avionics caused by excessive heat, and they can eliminateproblems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help preventvandalism and theft.The Rockwell OV-10 Bronco Canopy Cover is custom-designed for each model, as well as your aircraft's specific antenna andtemperature probe placements, if applicable. The Canopy Cover is designed to enclose the windshield, side windows and canopyroof. The Canopy Cover attaches using adjustable "belly straps", which run under the belly and connect to the other side of thecover with a quick-release plastic buckle. When requested, it is also sometimes possible to design Canopy covers that can attachto the aircraft fuselage using pop-riveted snap-heads at the rear and snap-head screws on the engine cowl.This cover type is made from Silver Acrylic Sunbrella canvas and is 100% lined with a soft and smooth microfiber. Bruce's CustomCovers developed this material combination especially for aircraft protection. The outer material is medium weight and treated forwater resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching.The material is very reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature onthe hottest of days. It is water, ice and snow repellent, yet breathable to allow moisture to escape from between the cover and theaircraft surface.Canopy Covers are commonly referred to as Cabin Covers, Fuselage Covers, Canvas Covers, Canopy Caps, etc.Technical Sheet: Rockwell OV-10 BroncoPage 1

Rockwell OV-10 Canopy CoversDescriptionCANOPY COVER, SNAP-ON TYPERockwell OV-10 Canopy CoversPart NumberPriceOV10-005 695.00Section 2: Engine/Prop CoversThe Rockwell OV-10 Bronco Propeller Cover is a one-piece design that form fits to the blades and spinner. The prop cover slipsover the blades and spinner and is attached by a plastic all-weather zipper on the bottom of the blades. Propeller covers can bemade for multiple numbers of blades, and for wooden, composite or metal props. The Propeller Cover is normally made fromAcrylic Sunbrella or Solution-Dyed Polyester and is lined 100% with a soft and smooth microfiber. Insulated Propeller Coversworks well in cold climates to help with engine preheating. These insulated versions are made with a thicker, quilted, waterrepellent, and breathable material.This cover type is made from Silver Acrylic Sunbrella canvas and is 100% lined with a soft and smooth microfiber. Bruce's CustomCovers developed this material combination especially for aircraft protection. The outer material is medium weight and treated forwater resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching.The material is very reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature onthe hottest of days. It is water, ice and snow repellent, yet breathable to allow moisture to escape from between the cover and theaircraft surface.DescriptionPart NumberPricePROPELLOR/SPINNER COVER, 3 Blade (set of 2)OV10-120 870.00INSULATED PROPELLOR/SPINNER COVER, 3 Blade (set of 2)OV10-125 1245.00Section 3: Plugs & ProtectionEngine Inlet Plugs are custom fit for your Rockwell OV-10 Bronco intakes, made with heavy-duty vinyl material, and stuffed with asingle block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Engineplugs have warning flags that are visible from the cockpit or 'remove before flight' streamers sewn onto the face of the plugs. Mostplugs are imprinted with the aircraft registration number in black for an extra charge. Storage bag NOT included. Engine plugs maybe inserted after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs,Cowl Blocks, Engine Blocks, and Engine Bungs.Pitot Tube Covers, made of Naugahyde vinyl, are designed to cover the entirepitot assembly. Slipping on over the tube, the cover tightens around the base with a special Velcro strap detail. A "remove beforeflight" streamer is attached to the cover. Heat Resistant Pitot Covers are designed to withstand more than 500Â Fahrenheit, andwill prevent the pitot cover from melting onto the tube if the pitot heat is accidentally turned on with the pitot cover attached.Technical Sheet: Rockwell OV-10 BroncoPage 2

ENGINE PLUGS PREVENT BIRD NEST FOD. Piper Saratoga Engine Cowling Bird's NestDescriptionPart NumberPriceENGINE INLET PLUGS (set of 4)OV10-100 315.00S2T RUDDER TRIMMER PLUG W/ RBF STREAMEROV10-410 100.00PITOT COVEROV10-HP 35.00Section 7: Light Weight Products: Travel Covers and FlyAway CoversThe Lightweight Travel Canopy Cover will cover the same area as our standard Canopy Cover, but the material used is verylightweight and will fold up and store in a much smaller space. This cover is ideal for the airplane that is stored in a hangar full-timeand only needs a cover on rare occasions.Travel Covers are made with Silver Solution-Dyed Polyester fabric and only lined over the windshield to save weight. The materialis lightweight and more compact for easy stowage in the aircraft. The polyester material is water resistant, but only intended foroccasional use outside. We also have an ultra lightweight material available for fitted hangar dust covers. For daily outdoor use, thenon-travel Sunbrella Cover is the best choice.DescriptionTRAVEL COVER, Light Weight Canopy Cover, Snap-On TypePart NumberPriceOV10-800 560.00Prices subject to change. Other Covers and Design Alterations: Prices on request.Prices are FOB Morgan Hill, CA. Sales tax on orders shipped to California addresses. Orders take approximately 3weeks to complete. For domestic orders we normally ship by UPS ground service. Next day shipping and air parcel postis available on request. We can take payment by Visa, Mastercard, American Express, or Discover.Bruce's Custom Covers offers protective covers and plugs for virtually every type of airplane, jet and helicopter. If youhave questions about our products please call any time TOLL FREE: 800/777-6405, or FAX: 408/738-2729.Technical Sheet: Rockwell OV-10 BroncoPage 3

Technical Sheet: Rockwell OV-10 BroncoPage 4

Technical Sheet: Rockwell OV-10 BroncoPage 5